Follow these easy steps to get your AEG FAVORIT 50760 i Dishwasher up and running in no time.
Inspect the dishwasher for any transport damage. Do not connect the appliance if it is damaged. Contact your retailer in case of damage.
Install the dishwasher on a firm, level floor. If the floor is uneven, adjust the threaded feet using a screwdriver to ensure the appliance is stable and level.
Connect the dishwasher to a cold water supply. Ensure that the water connection complies with local plumbing regulations.
Ensure the electrical supply voltage matches the voltage indicated on the appliance rating plate. The appliance must be earthed. Do not use extension cables or adaptors.
Set the water softener to match the hardness of your water supply. This can be done manually or electronically.
Before using the dishwasher for the first time, fill the salt container with special dishwasher salt if you are using detergent and salt separately.
Fill the rinse aid dispenser. Adjust the rinse aid dosing if necessary. Wipe up any spilt rinse aid to prevent excessive foaming.
Remove all scraps of food from dishes before loading. Ensure that the spray arms can rotate freely.
Choose a wash programme that suits the nature and degree of soiling on the dishes. Refer to the programme table for guidance.
Open the tap fully, close the dishwasher door, and press the ON/OFF button. Select the desired programme to start the wash cycle.